Nissan Altima (L32) 2007-2012 Service Manual: Function diagnosis
Additional service when replacing control unit
Description Initial setting is necessary when replacing main power window and door lock/unlock switch. CAUTION: The following specified operations are not performed under the non-initial ...Power window system
System Diagram POWER WINDOW ANTI-PINCH SYSTEM System Description POWER WINDOW MAIN SWITCH INPUT/OUTPUT SIGNAL CHART POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH INPUT/OUTPUT SIGNAL CHART POWE ...Other materials:
Rear-facing child restraint installation
using LATCH
For additional information, see all Warnings
and Cautions in the "Child safety"
and "Child restraints" before installing
a child restraint.
Do not use the lower anchors if the combined
weight of the child and the child restraint
exceeds 65 lbs. (29.5 kg). If the combined
weight of the child and the ...
CVT Fluid
Inspection
CHECKING CVT FLUID
Fluid level should be checked with the fluid warmed up to 50 to 80°C (122 to
176°F). The fluid level check procedure
is as follows:
1. Check for fluid leakage.
2. With the engine warmed up, drive the vehicle in an urban area.
When ambient temperature is 20 ...
Additional service when removing battery
negative terminal
Description
Initial setting is necessary when battery terminal is removed.
CAUTION:
The following specified operations are not performed under the non-initialized
condition.
• Auto-up operation
• Anti-pinch function
• Retained power operation
Special Repair
Requirement
INITIALIZ ...