Nissan Altima 2007-2012 Service Manual: Defogger
- Basic inspection
- Function diagnosis
- Component diagnosis
- Rear window defogger switch
- Rear window defogger relay
- Rear window defogger power supply and ground circuit
- Driver side door mirror defogger
- Passenger side door mirror defogger
- ECU diagnosis
- Symptom diagnosis
- Rear window defogger and door mirror defogger do not operate
- Rear window defogger does not operate but both of door mirror defogger operate
- Both doors mirror defogger don’t operate but rear window defogger operates
- Driver side door mirror defogger does not operate
- Passenger side door mirror defogger does not operate
- Rear window defogger switch does not light, but rear window defogger operates
- Precaution
- On-vehicle repair
Front wiper and washer switch
Removal and Installation NOTE: The wiper washer switch is part of the combination switch assembly. REMOVAL 1. Remove the spiral cable. Refer to SR-8, "Removal and Installation". 2. Di ...Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1. GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the ...Other materials:
LDW system operation
The LDW system operates above approximately
45 MPH (70 km/h).
When the vehicle approaches either the left or
the right of the traveling lane, the LDW system
will chime a sound and the LDW light on the
instrument panel will blink to alert the driver
The LDW system is not designed to operate
...
P0703 stop lamp switch
Description
BCM detects ON/OFF state of the stop lamp switch and transmits the data to
the TCM via CAN communication
by converting the data to a signal.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If “DTC CONFIRMATION P ...
None of the power windows can be operated using any switch
Diagnosis Procedure
1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to BCS-42, "Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2. CHECK MAIN POWER W ...