Nissan Altima Owners Manual: Bluetooth® Hands-Free Phone System voice commands

To access the Bluetooth® Hands-Free Phone System voice commands:

1. Press the 2. Say “Call” and then a name in the vehicle button.


2. Say “Call” and then a name in the vehicle phonebook to call that entry. Otherwise, say “Phone” to access various phone commands.

If the Bluetooth® has been set to “Off”, the system announces: “Bluetooth® is off. Would you like to turn Bluetooth® on?” If no phone is connected to the system and the vehicle is stationary, the system announces: “There is no phone connected.Would you like to connect a phone now?” Say “Yes” to connect a phone. All further Bluetooth® Hands-Free Phone System voice commands are only available if a phone is connected.

If a phone is connected and Bluetooth® is set to “On”, the following voice commands are available:

● Call (a name) Speak the name of the contact in which you are trying to call. System will confirm correct contact. Say “Dial” to initiate dialing.

● Dial Number
Allows for up to 24 digits to be dialed. After the number is entered, say “Dial” to initiate dialing. Say “Correction” to correct the number entered. Say “Go Back” to return to the main menu.

● List Phonebook
Starting with the first alphabetical entry in the vehicle phonebook, the system prompts for an additional command. Say “Dial” to call the number of the phonebook entry. Say “Send Text” to send a text message to the number of the phonebook entry. Say “Next Entry” to skip to the next alphabetical entry in the vehicle phonebook, where the same options will then be available.

● Recent Calls
The system prompts for an additional command.

Say “Missed Calls”, “Incoming Calls” or “Outgoing Calls” to display a list of such calls on the screen. Speak the number of the entry displayed on the screen to dial that number or say “Next Page” to view entries on the next page (if available).

● Redial
Redials the last called number.

● Read Text
Reads an incoming text message. For more information about text messaging with the Bluetooth® Hands-Free Phone System, see “Bluetooth® Hands-Free Phone System with Navigation System” in this section.

● Send Text
Sends a text message. For more information about text messaging with the Bluetooth® Hands-Free Phone System, see “Bluetooth® Hands-Free Phone System with Navigation System” in this section.

● Select Phone
The system replies “Please use manual controls to continue”. Use manual controls to change the active phone from among the listed phones connected to the vehicle.

For more information about the Bluetooth® Hands-Free Phone System, see “Bluetooth® Hands-Free Phone System with Navigation System” in this section.

    System features
    NISSAN Voice Recognition can activate the following systems: ● Bluetooth Hands-Free Phone System ● Navigation ● Audio ● Information ● My Apps For additional info ...

    Navigation System voice commands
    The following voice commands are available for the Navigation System: ● Street Address (address) ● Points of Interest (name) ● POI by Category ● Home ● Address Book ...

    Other materials:

    B2191, P1615 difference of key
    Description Performs ID verification through BCM and Intelligent Key when push-button ignition switch is pressed. Prohibits the release of steering lock or start of engine when an unregistered ID of Intelligent Key is used. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.P ...

    P0500 VSS
    Description The vehicle speed signal is sent to the combination meter from the “ABS actuator and electric unit (control unit)” by CAN communication line. The combination meter then sends a signal to the ECM by CAN communication line. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC P050 ...

    Driver air bag module
    Exploded View 1. Steering switch connector 2. Steering switch ground connector 3. Steering switches 4. Driver air bag module 5. Driver air bag module connectors 6. Side lid (RH/LH) A. Steering switch screw B. Driver air bag module bolt (RH/LH) Removal and Installation REMOVAL CAUTION: ...