Nissan Altima (L32) 2007-2012 Service Manual: On-vehicle maintenance
PRE-INSPECTION FOR DIAGNOSTIC
Basic Inspection
BASIC INSPECTION
1.INSPECTION START
1. Check the service history.
2. Check the following parts.
• Fuse/circuit breaker blown.
• Poor connection, open or short circuit of harness connector.
• Battery voltage.
Is the inspection result normal? YES >> Inspection End.
NO >> Repair or replace the malfunctioning parts.
Power window lock switch does not function
Diagnosis Procedure 1.REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH Replace main power window and door lock/unlock switch. Refer to PWC-91, "Removal and Installation". After tha ...On-vehicle repair
POWER WINDOW MAIN SWITCH Removal and Installation REMOVAL 1. Remove the power window main switch finisher (2). Refer to INT-12, "Removal and Installation". 2. Power window main swit ...Other materials:
Ecu diagnosis
ECM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Remarks:
● Specification data are reference values.
● Specification data are output/input values
which are detected or supplied by the ECM at the connector.
* Specification data may not be directly related to their components ...
Engine control system
System Diagram
System Description
ECM performs various controls such as fuel injection control and ignition
timing control.
Component Parts Location
1. Intake valve timing control solenoid
valve
2. Ignition coil (with power transistor)
and spark plug
3. Knock sensor,
Crankshaft posi ...
IPDM-E branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose
connection (unit side
and connector side).
Is the in ...