Nissan Altima (L32) 2007-2012 Service Manual: Exterior sedan
License lamp finisher
Removal and Installation 1. License lamp finisher REMOVAL 1. Remove the trunk lid finisher (if equipped). Refer to INT-23, "Removal and Installation". 2. Remove the license lamp fi ...Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER ...Other materials:
TPMS
System Diagram
System Description
BODY CONTROL MODULE (BCM)
The BCM is shown with the instrument panel LH removed. The BCM
reads the air pressure signal received by the tire pressure receiver,
and controls the low tire pressure warning lamp as shown below. It
also has a self-diagnosis funct ...
Cooling fan control
System Diagram
System Description
INPUT/OUTPUT SIGNAL CHART
*1: The ECM determines the start signal status by the signals of engine speed
and battery voltage.
*2: This signal is sent to ECM via the CAN communication line.
SYSTEM DESCRIPTION
The ECM controls the cooling fan correspondin ...
ECU Diagnosis
ECM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Remarks:
● Specification data are reference
values.
● Specification data are output/input
values which are detected or supplied by the ECM at the connector.
* Specification data may not be directly related to the ...