Nissan Altima 2007-2012 Service Manual: ODO/TRIP meter
System Diagram
System Description
The vehicle speed signal and the memory signals from the meter memory circuit are processed by the combination meter and the mileage is displayed.
HOW TO CHANGE THE DISPLAY FOR ODO/TRIP METER
Refer to Owner's Manual for odo/trip meter operating instructions.
Component Parts Location
1. Combination meter M24
2. IPDM E/R E17, E18, E201, F10
3. ECM E10
4. TCM F16
5. BCM M17, M18, M19, M21 (view with instrument panel removed)
6. ABS actuator and electric unit (control unit) E26
7. Fuel level sensor unit and fuel pump (fuel level sensor) B42 (view with rear seat and inspection hole cover removed)
8. Ambient sensor E211 (view of front bumper fascia)
9. Oil pressure switch F41 (QR25DE) (view with engine removed)
10. Oil pressure switch F41 (VQ35DE) (view with engine removed)
11. Parking brake switch M73 (Sedan with M/T and Coupe) (view with center console removed)
11. Parking brake switch M73 (Sedan with M/T and Coupe) (view with center console removed)
Component Description
Fuel gauge
System Diagram System Description The fuel gauge indicates the approximate fuel level in the fuel tank. The fuel gauge is regulated by the unified meter control unit and a variable resistor s ...Shift position indicator
System Diagram System Description The TCM receives CVT indicator signals from the park/neutral position (PNP) switch. The TCM then sends CVT position indicator signals to the combination meter ...Other materials:
BCM
Diagnosis Procedure
1. CHECK FUSE AND FUSIBLE LINK
Check if the following BCM fuse or fusible link are blown.
Is the fuse or fusible link blown?
YES >> Replace the blown fuse or fusible link after repairing the affected
circuit.
NO >> GO TO 2
2. CHECK POWER SUPPLY CIRCUIT
1. ...
Clutch master cylinder
Removal and Installation
REMOVAL
1. Remove the air cleaner and air duct. Refer to EM-19, "Removal and
Installation" for QR25DE and EM-
123, "Removal and Installation" for VQ35DE.
2. Use one of the following methods to remove hose from master cylinder.
• Drain clutch ...
Cleaning
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Clean the outside of the windshield with a washer
fluid or a mild detergent. Your windshield is clean
if beads do not form whe ...