Nissan Altima 2007-2012 Service Manual: Front passenger side power window alone does not operate

Diagnosis Procedure

1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Check power window and door lock/unlock switch RH.

Refer to PWC-308, "FRONT POWER WINDOW SWITCH : Component Function Check".

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace the malfunctioning parts.

2. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH SERIAL LINK CIRCUIT

Check power window and door lock/unlock switch RH serial link circuit.

Refer to PWC-332, "FRONT POWER WINDOW SWITCH : Component Function Check".

Is the inspection result normal? YES >> GO TO 3

NO >> Repair or replace the malfunctioning parts.

3. CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT

Check front power window motor RH circuit.

Refer to PWC-315, "PASSENGER SIDE : Component Function Check".

Is the inspection result normal? YES >> Inspection end.

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Driver side power window alone does not operate
    Diagnosis Procedure 1. CHECK FRONT POWER WINDOW MOTOR LH Check front power window motor LH. Refer to PWC-313, "DRIVER SIDE : Component Function Check". Is the inspection result norm ...

    Rear lh side power window alone does not operate
    Diagnosis Procedure 1. CHECK REAR POWER WINDOW SWITCH LH Check rear power window switch LH. Refer to PWC-310, "REAR POWER WINDOW SWITCH : Component Function Check". Is th e inspectio ...

    Other materials:

    Can communication circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Disconnect all the unit connectors on CAN communication system. 4. Check terminals and connectors for damage, bend and loose con ...

    Occupant classification system
    System Diagram Occupant Classification System (OCS) The occupant classification system (OCS) identifies if a child or child seat is present in the front passenger seat. The OCS receives inputs from the occupant classification sensor mat (located inside the passenger seat cushion assembly ...

    License lamp finisher
    Removal and Installation 1. License lamp finisher REMOVAL 1. Remove the trunk lid finisher (if equipped). Refer to INT-23, "Removal and Installation". 2. Remove the license lamp finisher nuts. 3. Remove license lamp finisher by pulling toward the rear, then disconnect the tr ...