Nissan Altima (L32) 2007-2012 Service Manual: Front tweeter (coupe)
Description
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending them to the front tweeters using the audio signal circuits.
Diagnosis Procedure
1.HARNESS CHECK
1. Disconnect BOSE speaker amp. connector B122 and suspect tweeter connector.
2. Check continuity between BOSE speaker amp. harness connector B122 (A) and suspect tweeter harness connector (B).
3. Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
Are continuity test results as specified? YES >> GO TO 2
NO >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.FRONT TWEETER SIGNAL CHECK
1. Connect BOSE speaker amp. connector B122 and suspect tweeter connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between BOSE speaker amp. harness connector B122 terminals with CONSULT-III or oscilloscope.
Are the audio signal voltage readings as specified? YES >> Replace suspect tweeter. Refer to AV-217, "Removal and Installation".
NO >> GO TO 3
3.HARNESS CHECK
1. Disconnect audio unit connector M43 and BOSE speaker amp.
connector B121.
2. Check continuity between audio unit harness connector M43 (A) and BOSE speaker amp. harness connector B121 (B).
3. Check continuity between audio unit harness connector M43 (A) and ground.
Are continuity test results as specified? YES >> GO TO 4
NO >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.FRONT TWEETER SIGNAL CHECK
1. Connect audio unit connector and BOSE speaker amp. connector.
2. Turn ignition switch ACC.
3. Push “POWER” switch.
4. Check the signal between audio unit harness connector M43 terminals with CONSULT-III or oscilloscope.
Are the audio signal voltage readings as specified? YES >> Replace BOSE speaker amp. Refer to AV-216, "Removal and Installation - Coupe".
NO >> Replace audio unit. Refer to AV-215, "Removal and Installation".
Front door speaker (sedan)
Description
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker
amp. amplifies the audio
signals before sending them to the front door speakers using the audio signal
ci ...
Tweeter (sedan)
Description
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker
amp. amplifies the audio
signals before sending them to the front tweeters using the audio signal
circui ...
Other materials:
P0181 FTT Sensor
Description
The fuel tank temperature sensor is used to detect the fuel temperature
inside the fuel tank. The sensor modifies a voltage signal from
the ECM. The modified signal returns to the ECM as the fuel temperature
input. The sensor uses a thermistor which is sensitive to the
change in te ...
P1550 Battery current sensor
Description
The power generation voltage variable control enables fuel consumption to
be decreased by reducing the
engine load which is caused by the power generation of the generator. The
battery current sensor is installed
to the battery cable at the negative terminal. The sensor measures t ...
Power window lock switch
Description
Ground circuit of main power window and door lock/unlock switch shuts off if
power window lock switch of
main power window and door lock/unlock switch is operated. This inhibits all
operation, except for the main
switch.
Component Function Check
1. CHECK POWER WINDOW LOCK SIGNA ...
