Nissan Altima (L32) 2007-2012 Service Manual: Auto operation does not operate but manual operates normally (driver side)
Diagnosis Procedure
1. PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to PWC-21, "POWER WINDOW MAIN SWITCH : Special Repair Requirement".
Is the inspection result normal? YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2. CHECK ENCODER
Check encoder.
Refer to PWC-19, "POWER WINDOW MAIN SWITCH : Component Function Check".
Is the inspection result normal? YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Anti-pinch system does not operate normally (driver side)
Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-21, "POWER WINDOW MAIN SWITCH : Special Repair Requirement". Is the inspection ...Power window retained power operation does not operate properly
Diagnosis Procedure 1. CHECK DOOR SWITCH Check door switch. Refer to PWC-32, "Component Function Check". Is the inspection result normal? YES >> Inspection End. NO >> ...Other materials:
Control panel buttons — color screen with Navigation System (if so equipped)
1. PWR button/VOL (volume) control knob
2. Display screen
3. ENTER / AUDIO button / TUNE / SCROLL
knob
4. BACK button
5. MAP button*
6. NAV button*
7. button
8. (brightness control) button
9. button**
10. CAMERA button
* For information regarding the Navigation system
control butto ...
Accelerator pedal released position
learning
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn
the fully released position of the
accelerator pedal by monitoring the accelerator pedal position sensor output
signal. It must be performed each
time harness connector of accelerator pedal position sensor ...
B2601 shift position
Description
BCM confirms the shift position with the following 2 signals.
• CVT selector lever
• P position signal from IPDM E/R (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-4 ...