Nissan Altima (L32) 2007-2012 Service Manual: Component diagnosis
- U1000 can comm circuit
- U1010 control unit (can)
- U0415 vehicle speed sig
- B2562 low voltage
- Power supply and ground circuit
- Combination switch input circuit
- Combination switch output circuit
Air pressure monitor
Diagnosis Description
DESCRIPTION
During driving, the TPMS receives the signal transmitted from the transmitter
installed in each wheel, when
the tire pressure becomes low. The control unit (BCM) ...
U1000 can comm circuit
Description
Refer to LAN-7, "System Description".
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1. PERFORM SELF DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 second or m ...
Other materials:
Audio system (coupe)
System Diagram
System Description
AUDIO SYSTEM
The audio system consists of the following components
• Audio unit
• Window antenna
• Steering wheel audio control switches
• Door speakers
• Front tweeters
• Rear speakers
When the audio system is on, radio signals are receive ...
B210a steering lock condition switch
Description
There are 2 switches in the electronic steering column lock. IPDM E/R
compares those 2 switches conditions
to judge the present steering status and transmit the result to BCM via CAN
communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210A is displayed with DTC U10 ...
B260A ignition relay
Description
BCM turns ON the following relays to ignition power supply to each ECU when
the ignition switch is turned
ON.
• Ignition relay-1 (inside IPDM E/R)
• Ignition relay-2 (inside fuse box)
• Blower fan motor relay
BCM checks any ignition relay ON request for consistency with ...
