Nissan Altima 2007-2012 Service Manual: License plate lamp
Bulb Replacement
REMOVAL
1. Position trunk lid finisher aside.
2. Turn license plate lamp bulb socket counterclockwise to unlock and remove.
3. Pull license plate lamp bulb to remove from socket.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
REMOVAL
1. Remove the license lamp finisher. Refer to EXT-23, "Removal and Installation".
2. Disconnect the license plate lamp connector.
3. Remove the license plate lamp screw and remove the license plate lamp.
INSTALLATION
Installation is in the reverse order of removal.
Back-up lamp
Bulb Replacement Removal 1. Remove the rear combination lamp. Refer to EXL-260, "Removal and Installation". 2. Turn back-up lamp bulb socket counterclockwise to unlock and remove. ...Rear combination lamp
Bulb Replacement Removal 1. Remove the rear combination lamp. Refer to EXL-260, "Removal and Installation". 2. Turn the rear turn signal lamp bulb socket counterclockwise and remove ...Other materials:
Power window lock switch
Description
Ground circuit of main power window and door lock/unlock switch shuts off if
power window lock switch of
main power window and door lock/unlock switch is operated. This inhibits all
operation, except for the main
switch.
Component Function Check
1. CHECK POWER WINDOW LOCK SIGNA ...
Headlamp
CONSULT-III Function
WORK SUPPORT
1 : Initial setting
2: With auto light system
DATA MONITOR
1: With auto light system.
2: The item is indicated, not monitored.
ACTIVE TEST
...
Inspection and adjustment
BASIC INSPECTION
Special Repair Requirement
1.INSPECTION START
1. Check service records for any recent repairs that may indicate a related
malfunction, or a current need for
scheduled maintenance.
2. Open engine hood and check the following:
- Harness connectors for improper connecti ...