Nissan Altima 2007-2012 Service Manual: Precaution

HANDLING PRECAUTIONS FOR PLASTICS

Precautions For Plastics

1. When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and remove them if necessary or take suitable measures to protect them.

2. Plastic parts should be repaired and painted using methods suiting the materials, characteristics.

LOCATION OF PLASTIC PARTS

    Features of new model
    BODY EXTERIOR PAINT COLOR Body Exterior Paint Color M= Metallic, S= Solid, 2S= Solid and Clear, 2P= 2-stage Pearl, 3P= 3-Stage pearl, PM=Pearl metallic, Black is solvent based, all others are ...

    On-vehicle repair
    ...

    Other materials:

    Ignition timing
    Description This describes how to check the ignition timing. For the actual procedure, follow the instructions in “BASIC INSPECTION”. IGNITION TIMING : Special Repair Requirement 1.CHECK IGNITION TIMING 1. Attach timing light to No. 1 igniton coil (1) wire as shown. 2. Check ignitio ...

    Intake manifold
    Removal and Installation 1. Intake manifold 2. Rubber seal 3. Intake manifold adapter 4. Gasket 5. Electric throttle control actuator 6. Rubber seal 7. PCV hose 8. EVAP canister purge volume control solenoid valve 9. EVAP hose REMOVAL WARNING: To avoid the danger of being scalded, nev ...

    P0102, P0103 maf sensor
    Description The mass air flow sensor (1) is placed in the stream of intake air. It measures the intake flow rate by measuring a part of the entire intake flow. The mass air flow sensor controls the temperature of the hot wire to a certain amount. The heat generated by the hot wire is reduced a ...