Nissan Altima 2007-2012 Service Manual: Power distribution system

On-vehicle repair
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) Removal and Installation REMOVAL 1. Disconnect the battery negative terminal. 2. Remove the IPDM E/R cover (1) while pressing the p ...

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1. GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the e ...

Other materials:

P0101 maf sensor
Description The mass air flow sensor (1) is placed in the stream of intake air. It measures the intake flow rate by measuring a part of the entire intake flow. The mass air flow sensor controls the temperature of the hot wire to a certain amount. The heat generated by the hot wire is reduced a ...

Key cylinder switch
Description For vehicles equipped with LH and RH anti-pinch system, the main power window and door lock/unlock switch detects condition of the door key cylinder switch and transmits to BCM as the LOCK or UNLOCK signal. For vehicles equipped with LH anti-pinch system only, the front door loc ...

M&A branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the combination meter for damage, bend and loose connection (unit side and connector side). ...