Nissan Altima 2007-2012 Service Manual: A-BAG branch line circuit

Diagnosis Procedure

1.CHECK AIR BAG DIAGNOSIS SENSOR UNIT

Check the air bag diagnosis sensor unit. Refer to SRC-3, "Work Flow".

Is the inspection result normal? YES >> Replace the main harness.

NO >> Replace parts whose air bag system has a malfunction.

    ECM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and co ...

    BCM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors ...

    Other materials:

    Roof side molding
    Removal and Installation 1. Body side outer panel 2. Windshield 3. Roof REMOVAL 1. Lift and twist the roof side molding up from the rear edge. 2. Disconnect the roof side molding from the clips, and remove the roof side molding. INSTALLATION Installation is in the reverse order of ...

    Engine coolant
    Changing Engine Coolant WARNING: • To avoid being scalded, never change the coolant when the engine is hot. • Wrap a thick cloth around cap and carefully remove the cap. First, turn the cap a quarter of a turn to release built-up pressure. Then turn the cap all the way. DRAINING ENGINE ...

    The oil pressure warning lamp does not turn on
    Description The oil pressure warning lamp stays off when the ignition switch is turned ON. Diagnosis Procedure 1.CHECK OIL PRESSURE WARNING LAMP Perform IPDM E/R auto active test. Refer to PCS-14, "Diagnosis Description". Is oil pressure warning lamp illuminated? YES >> G ...