Nissan Altima (L32) 2007-2012 Service Manual: Power window control system lh&rh front anti-pinch-coupe
- Basic inspection
- Function diagnosis
- Component diagnosis
- Power supply and ground circuit
- Power window motor
- Encoder
- Door switch
- Door key cylinder switch
- Power window serial link
- Power window lock switch
- ECU diagnosis
- Precaution
- Symptom diagnosis
- None of the power windows can be operated using any switch
- Driver side power window alone does not operate
- Passenger side power window alone does not operate
- Anti-pinch system does not operate normally (driver side)
- Anti-pinch system does not operate normally (passenger side)
- Auto operation does not operate but manual operates normally (driver side)
- Auto operation does not operate but manual operates normally (passenger side)
- Power window retained power operation does not operate properly
- Does not operate by key cylinder switch
- Keyless power window down does not operate
- Power window lock switch does not function
- On-vehicle maintenance
- On-vehicle repair
On-vehicle repair
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2). Refer to
INT-34, "Removal and Installation".
2. Power window main swit ...
Basic inspection
...
Other materials:
Ecu diagnosis
ECM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Remarks:
● Specification data are reference values.
● Specification data are output/input values
which are detected or supplied by the ECM at the connector.
* Specification data may not be directly related to their components ...
Features of new model
IDENTIFICATION INFORMATION
Model Variation - Sedan
Model Variation - Coupe
Identification Number - Sedan
1. Vehicle identification number (under
carpet on cross member)
2. Emission control information label
3. Air Conditioner specification label
4. Vehicle identification number plate ...
ABS branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the ABS actuator and electric unit
(control unit) for damage, bend
and loose connection (unit ...
