Nissan Altima 2007-2012 Service Manual: Precaution

HANDLING PRECAUTIONS FOR PLASTICS

Precautions For Plastics

1. When repairing and painting a portion of the body adjacent to plastic


1. When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and remove them if necessary or take suitable measures to protect them.

2. Plastic parts should be repaired and painted using methods suiting the materials, characteristics.

LOCATION OF PLASTIC PARTS







On-vehicle repair


    Features of new model
    BODY EXTERIOR PAINT COLOR Body Exterior Paint Color M= Metallic, S= Solid, 2S= Solid and Clear, 2P= 2-stage Pearl, 3P= 3-Stage pearl, PM=Pearl metallic, Black is solvent based, all others are ...

    Other materials:

    BCM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the BCM for damage, bend and loose connection (unit side and connector side). Is the inspec ...

    Front passenger air bag module
    Removal and Installation REMOVAL CAUTION: • Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three minutes. • Do not use air tools or electric tools for servicing. • Always work from the side of air bag module. Do not work fro ...

    P0845 transmission fluid pressure sensor B (pri pressure sensor)
    Description The transmission fluid pressure sensor B (primary pressure sensor) detects primary pressure of CVT and sends TCM the signal. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE NOTE: If “DTC CONFIRMATION PROCEDURE” has been previously performed, always turn ...