Nissan Altima 2007-2012 Service Manual: Fender protector
Removal and Installation
1. Fender protector
2. Fender protector side cover
A. J-clips
B. Clips
C. Center mudguard screw
a. Sheet metal nut
REMOVAL
1. Remove the engine under cover. Refer to EXT-13, "Removal and Installation".
2. Remove the screw from center mudguard.
3. Remove the fender protector screws and clips.
4. Remove the fender protector.
INSTALLATION
Installation is in the reverse order of removal.
Cowl top
Removal and Installation 1. Cowl top seal 2. Cowl top side trim covers 3. Cowl top foam blocks 4. Cowl top A. Clips REMOVAL 1. Remove both the RH and LH wiper arms. Refer to WW-116, "FRO ...Mudguard
Removal and Installation 1. Center mudguard A. C205 push pin B. Splash guard screw REMOVAL 1. Remove the C205 push-pins located on the under body. 2. Remove splash guard screws. 3. Remov ...Other materials:
P0456 Evap control system
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0456 is displayed with DTC P0442, first perform the trouble diagnosis
for DTC P0456.
This diagnosis detects very small leakage in the EVAP line between fuel tank and
EVAP canister purge volume
control solenoid valve, using the negative pressure. ...
BCM (Body control module)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Terminal Layout
Physical Values
1: Sedan only
2: With LH front window anti-pinch
3: With LH and RH front window anti-pinch
4: With Intelligent Key
5: Without Intelligent Key
Wiring Diagram - ENGIN ...
ECU diagnosis
AIR CONDITIONER CONTROL
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
Wiring Diagram - Air Conditioner Control (Auto) -
Coupe
Wiring Diagram - Air Conditioner Control (Auto) -
Sedan
...