Nissan Altima (L32) 2007-2012 Service Manual: Sunroof does not operate properly
Diagnosis Procedure
1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to BCS-42, "Diagnosis Procedure".
>> GO TO 2
2. CHECK SUNROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunroof motor assembly power supply and ground circuit.
Refer to RF-12, "SUNROOF MOTOR ASSEMBLY : Component Function Check".
>> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Auto operation does not operate
Diagnosis Procedure
1. PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to RF-6, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair
Requirement". ...
Other materials:
CVT Position
Inspection and Adjustment
INSPECTION
1. Place selector lever in “P” position, and turn ignition switch ON (engine
stop).
2. Make sure that selector lever can be shifted to other than “P” position when
brake pedal is depressed.
Also make sure that selector lever can be shifted fro ...
P0715 input speed sensor (pri speed
sensor)
Description
The input speed sensor (primary speed sensor) detects the primary pulley
revolution speed and sends a signal
to the TCM.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If “DTC CONFIRMATION PROCEDURE” has be ...
P0720 vehicle speed sensor cvt (secondary
speed sensor)
Description
The vehicle speed sensor CVT [output speed sensor (secondary speed sensor)]
detects the revolution of the
CVT output shaft and emits a pulse signal. The pulse signal is transmitted to
the TCM, which converts it into
vehicle speed.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMAT ...
