Nissan Altima Owners Manual: Receiving a call

When a call is received by the phone connected to the vehicle’s Bluetooth® Hands-Free Phone System, the call information is displayed on either the vehicle information display or both the vehicle information display and the control panel display.

Press the call. Press button to accept the
call. Press the During a call button to reject the call.


    Making a call
    To make a call from a phone connected to the vehicle’s Bluetooth® Hands-Free Phone System: 1. Press the button on the steering wheel. 2. The system will prompt you for a command. Say “Ca ...

    During a call
    While a call is active, press the button to access additional options. Speak one of the following commands: ● “Send” – Speak this command followed by the digits to enter digits durin ...

    Other materials:

    Anti-pinch system does not operate normally (passenger side)
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the ma ...

    B2193, P1612 chain of ecm-immu
    Description BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK. ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if ignition switch is turned ON. DTC Logic DTC DETECTION LOGI ...

    P0744 a/t tcc s/v function (lock -up)
    Description This malfunction is detected when the torque converter clutch does not lock-up as instructed by the TCM. This is not only caused by electrical malfunction (circuits open or shorted), but also by mechanical malfunction such as control valve sticking, improper solenoid valve operat ...