Nissan Altima Owners Manual: Safety—Seats, seat belts and supplemental restraint system
- Seats
- Front manual seat adjustment (if so equipped
- Front power seat adjustment (if so equipped for driver’s seat)
- Folding rear seat
- Front seat head restraints/headrests
- Rear seat head restraints/headrests
- Seat belts
- Precautions on seat belt usage
- Pregnant women
- Injured persons
- Three-point type seat belt with retractor
- Seat belt extenders
- Seat belt maintenance
- Child safety
- Child restraints
- Precautions on child restraints
- LATCH (Lower Anchors and Tethers for CHildren) System
- Rear-facing child restraint installation using LATCH
- Rear-facing child restraint installation using the seat belts
- Forward-facing child restraint installation using LATCH
- Forward-facing child restraint installation using the seat belts
- Installing top tether strap
- Booster seats
- Supplemental restraint system
Seats
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into i ...Other materials:
CVT system
System Diagram
Component Parts Location - Coupe
1. Control device assembly
2. Accelerator pedal position sensor
3. CVT unit harness connector
4. Primary speed sensor
5. Secondary speed sensor
6. PNP switch
7. TCM
8. Battery
9. Shift position indicator
Manual mode indicator
Component ...
P1217 engine over temperature
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC P1217 is displayed with DTC UXXXX, first perform the trouble diagnosis
for DTC UXXXX.
• If DTC P1217 is displayed with DTC P0607, first perform the trouble diagnosis
for DTC P0607. Refer
to EC-361, "DTC Logic".
If the cooling fa ...
The low washer fluid warning continues
displaying, or does not display
Description
• The warning is still displayed even after washer fluid is added.
• The warning is not displayed even though the washer tank is empty.
Diagnosis Procedure
1.CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT
Check the washer level switch signal circuit. Refer to MWI-51, "Diagnosi ...