Nissan Altima Owners Manual: Steering wheel switch for audio control

1. Source select and power on switch


1. Source select and power on switch 2. Menu control switch/ENTER button 3. 4. Volume control switch (Back) switch
4. Volume control switch

POWER on switch

With the ignition switch in the ACC or ON position, push the SOURCE switch to turn the audio system on.

SOURCE select switch

Push the source select switch to change the mode in the following sequence:

AM→FM1→FM2→SXM1 (satellite radio, if so equipped) → SXM2 (satellite radio, if so equipped) → CD* → USB/iPod* (if so equipped) → Bluetooth Audio* →Audio App*→ AUX* → AM.

* These modes are only available when compatible media storage is inserted into the device or connected to the system.

Volume control switch

Push the volume control switch to increase or decrease the volume.

Menu control


Menu control switch/ENTER button

While the display is showing a map or audio screen, tilt the Menu Control switch upward or downward to select a station, track, CD or folder.

For most audio sources, tilting the switch up/down for more than 1.5 seconds provides a different function than a tilting up/down for less than 1.5 seconds.

AM and FM:

● Tilt up/down for less than 1.5 seconds to increase or decrease the preset station.

● Tilt up/down for more than 1.5 seconds to seek up or down to the next station.

● Press the ENTER button to show the list of preset stations.

XM/SXM (if so equipped):

● Tilt up/down for less than 1.5 seconds to increase or decrease the preset station.

● Tilt up/down for more than 1.5 seconds to go to the next or previous channel.

● Press the ENTER button to show the XM/SXM Menu.

iPod (if so equipped):

● Tilt up/down for less than 1.5 seconds to increase or decrease the track number.

● Press the ENTER button to show the iPod Menu.

CD:

● Tilt up/down for less than 1.5 seconds to increase or decrease the track number.

● Tilt up/down for more than 1.5 seconds to increase or decrease the folder number (if playing compressed audio files).

● Press the ENTER button to show the CD Menu.

USB:

● Tilt up/down for less than 1.5 seconds to increase or decrease the track number.

● Tilt up/down for more than 1.5 seconds to increase or decrease the folder number.

● Press the ENTER button to show the USB Menu.

Bluetooth Audio (if so equipped):

● Tilt up/down for less than 1.5 seconds to skip ahead or back to the next song.

● Tilt up/down for more than 1.5 seconds to reverse or fast forward the current song.

AUX:

● Press the ENTER button to show the AUX Menu.

    CD care and cleaning
    ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● To clean a d ...

    Antenna
    Window antenna The antenna pattern is printed inside the rear window. CAUTION ● Do not place metalized film near the rear window glass or attach any metal parts to it. This may cause poor ...

    Other materials:

    B2609 steering status
    Description There are 2 switches in the electronic steering column lock (steering lock/unlock switch 1 and 2). BCM compares those two switches conditions to judge the present steering status. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2609 is displayed with DTC U1000, first perform the ...

    B210D starter relay
    Description Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210D is displa ...

    Electric ignition system
    System Diagram System Description INPUT/OUTPUT SIGNAL CHART *1: This signal is sent to the ECM through CAN communication line. *2: ECM determines the start signal status by the signals of engine speed and battery voltage. SYSTEM DESCRIPTION Firing order: 1 - 3 - 4 - 2 The ignition tim ...