Nissan Altima 2007-2012 Service Manual: Audio unit
Removal and Installation
REMOVAL
1. Remove the cluster lid D. Refer to IP-12, "Removal and Installation".
2. Remove the cluster lid D screws (A), then remove the audio unit screws (B) and the audio unit (1).
INSTALLATION
Installation is in the reverse order of removal.
Front tweeter
Removal and Installation REMOVAL 1. Remove the front pillar finisher. Refer to INT-15, "Removal and Installation" (coupe) and INT-36, "Removal and Installation" (sedan). 2. ...Other materials:
Can communication circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CONNECTOR INSPECTION
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect all the unit connectors on CAN communication system.
4. Check terminals and connectors for damage, bend and loose con ...
Front fog lamp
Aiming Adjustment
The fog lamp is a semi-sealed beam type which uses a replaceable halogen
bulb. Before performing aiming
adjustment, make sure of the following.
• Keep all tires inflated to correct pressure.
• Place vehicle on level ground.
• See that vehicle is unloaded (except ...
Audio unit (sedan)
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES - WITH BLUETOOTH
PHYSICAL VALUES - WITHOUT BLUETOOTH
Wiring Diagram - Sedan
...