Nissan Altima (L32) 2007-2012 Service Manual: Front wiper motor ground circuit
Diagnosis Procedure
1.CHECK FRONT WIPER MOTOR (GND) OPEN CIRCUIT
1. Turn the ignition switch OFF.
2. Disconnect front wiper motor.
3. Check continuity between front wiper motor harness connector and ground.
Does continuity exist? YES >> Front wiper motor ground circuit is normal.
NO >> Repair or replace harness.
Front wiper auto stop signal circuit
Component Function Check 1. CHECK FRONT WIPER (AUTO STOP) OPERATION 1. Select "FRONT WIPER STOP" of IPDM E/R DATA MONITOR item. 2. Operate the front wiper. 3. With the front wiper ...Front wiper and washer system
Wiring Diagram-Coupe Wiring Diagram-Sedan ...Other materials:
Changing engine coolant
A NISSAN dealer can change the engine coolant.
The service procedure can be found in the
NISSAN Service Manual.
Improper servicing can result in reduced
heater performance and engine overheating.
WARNING
● To avoid the danger of being scalded,
never change the coolant when the engin ...
Disassembly and assembly
DOOR MIRROR
Exploded View
1. Door mirror cover
2. Mirror housing assembly
3. Mirror glass and holder
Disassembly
1. Turn the mirror glass surface upward.
2. Apply a protective tape (A) to mirror housing. Insert a suitable
tool (B) into the concave gap between the mirror holder (1) and
...
P0607 ECM
Description
CAN (Controller Area Network) is a serial communication line for real time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent error
detection ability. Many electronic
control units are equipped onto a vehicle, and each c ...