Nissan Altima (L32) 2007-2012 Service Manual: Component diagnosis
- U1000 can comm circuit
- U1010 control unit (CAN)
- B2553 ignition relay
- B260A ignition relay
- B2611 ACC relay
- B2614 ACC relay circuit
- B2615 blower relay circuit
- B2616 ignition relay circuit
- B2618 BCM
- B261A push-button ignition switch
- Power supply and ground circuit
- Push-button ignition switch position indicator
Intelligent key
CONSULT-III Function (BCM - INTELLIGENT KEY) DATA MONITOR ...U1000 can comm circuit
Description Refer to LAN-7, "System Description". DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.PERFORM SELF DIAGNOSTIC 1. Turn ignition switch ON and wait for 2 second or mo ...Other materials:
P1553 Battery current sensor
Description
The power generation voltage variable control enables fuel consumption to
be decreased by reducing the
engine load which is caused by the power generation of the generator. The
battery current sensor is installed
to the battery cable at the negative terminal. The sensor measures t ...
Speedometer and odometer
Speedometer
The speedometer indicates vehicle speed.
Odometer/Twin trip odometer
The odometer 1 and the twin trip odometer 2
are displayed below the Vehicle Information Display
when the ignition switch is placed in the ON
position.
The odometer records the total distance the vehicle
ha ...
Front wiper motor lo circuit
Component Function Check
1. CHECK FRONT WIPER LO OPERATION
1. Start IPDM E/R auto active test. Refer to PCS-14, "Diagnosis Description".
2. Check that the front wiper operates at the LO operation.
1. Select "FRONT WIPER" of IPDM E/R active test item.
2. While operat ...