Nissan Altima (L32) 2007-2012 Service Manual: Abbreviations
Abbreviation List
The following ABBREVIATIONS are used:
How to read wiring diagrams
Connector symbols Most of connector symbols in wiring diagrams are shown from the terminal side. • Connector symbols shown from the terminal side are enclosed by a single line and followed ...Tightening torque of standard bolts
Tightening Torque Table *: Nominal diameter 1. Special parts are excluded. 2. This standard is applicable to bolts having the following marks embossed on the bolt head. ...Other materials:
ASCD Brake switch
Description
When the brake pedal is depressed, ASCD brake switch is turned OFF and stop
lamp switch is turned ON.
ECM detects the state of the brake pedal by those two types of input (ON/OFF
signal).
Refer to EC-1090, "System Diagram" for the ASCD function.
Component Function C ...
Camera on signal circuit (coupe)
Description
When the selector lever is placed in the R position, the rear view camera
control unit sends a camera ON signal
to the rear view camera.
Diagnosis Procedure
1.CHECK CAMERA ON SIGNAL CIRCUIT CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect rear view camera control unit con ...
Ground
Ground Distribution
MAIN HARNESS
ENGINE ROOM HARNESS
FRONT END MODULE HARNESS
ENGINE CONTROL HARNESS
BODY HARNESS
BODY NO. 2 HARNESS
HARNESS
Harness Layout
HOW TO READ HARNESS LAYOUT
The following Harness Layouts use a map style grid to help locate
connectors on the drawi ...