Nissan Altima 2007-2012 Service Manual: Air breather hose
Exploded View
1. Air cleaner
2. Air breather hose
3. Transaxle assembly
4. Heater pipe
5. Clip
A. Paint mark
Removal and Installation
CAUTION: • Install air breather hose with paint mark facing front.
• Insert air breather hose onto air breather tube until overlap area reaches the spool.
• Install air breather hose to heater pipe and air cleaner case by fully inserting the clip.
• Make sure there are no pinched or restricted areas on air breather hose caused by bending or winding when installing it.
Control cable
Exploded View
1. Control lever
2. Control device assembly
3. Control cable socket
4. Retainer grommet
5. Control cable
6. Bracket
7. Lock plate
8. Manual lever
Removal and Installation
RE ...
Differential side oil seal
Exploded View
1. Transaxle assembly
2. Differential side oil seal
Removal and Installation
REMOVAL
1. Remove drive shaft assembly. Refer to FAX-11, "Removal and
Installation (Left Side) ...
Other materials:
P1226 TP Sensor
Description
Electric throttle control actuator consists of throttle control motor,
throttle position sensor, etc. The throttle position sensor responds to
the throttle valve movement.
The throttle position sensor has two sensors. These sensors are a
kind of potentiometers which transform the ...
CD care and cleaning
● Handle a CD by its edges. Do not bend the
disc. Never touch the surface of the disc.
● Always place the discs in the storage case
when they are not being used.
● To clean a disc, wipe the surface from the
center to the outer edge using a clean, soft
cloth. Do not wipe the ...
Tire dressings
dressings. Tire manufacturers apply a coating to
the tires to help reduce discoloration of the rubber.
If a tire dressing is applied to the tires, it may
react with the coating and form a compound. This
compound may come off the tire while driving and
stain the vehicle paint.
If you choose ...