Start the engine, turn the fan control dial to the
desired position, and press the
button to
activate the air conditioner. When the air conditioner
is on, cooling and dehumidifying functions
are added to the heater operation.
The air conditioner cooling function operates only when the engine is running.
Cooling This mode is used to cool and dehumidify the air.
1. Press the button to the OFF
position.
2. Press the air flow control
button.
3. Turn the fan control dial to the desired position.
4. Push the button. The indicator light comes on.
5. Turn the temperature control dial to the desired position.
● For quick cooling when the outside temperature
is high, push the button to
the ON position. Be sure to return the
to the OFF position for normal cooling. MAX
A/C may be used for quick cooling.
Dehumidified heating
This mode is used to heat and dehumidify the air.
1. Press the button to the OFF
position.
2. Press the air flow control
button.
3. Turn the fan control dial to the desired position.
4. Push the button. The indicator
light
comes on.
5. Turn the temperature control dial to the desired position.
Dehumidified defogging
This mode is used to defog the windows and dehumidify the air.
1. Press the air flow control
button.
2. Turn the fan control dial to the desired position.
● When the or
are selected, the
air conditioner automatically turns on (the
indicator light may or may not illuminate) if
the outside temperature is more than 36°F
(2°C). This dehumidifies the air which helps
defog the windshield. The mode
automatically
turns off, allowing outside air to
be drawn into the passenger compartment
to further improve the defogging performance.
● The air conditioner is always on in
mode, regardless of whether the indicator
light is on or off.
3. Turn the temperature control dial to the desired position.
Operating tips
● Keep the windows and moonroof closed while the air conditioner is in operation.
● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly.
● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication.
● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
● If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. See “If your vehicle overheats” in the “In case of emergency” section of this manual.
Heater operation
Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets. 1. Press the button to the OFF position for normal h ...Air flow charts
The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air recirculation button should always be in the OFF position for heating and defr ...Other materials:
Audio unit (coupe)
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
Wiring Diagram — Coupe
...
ASCD indicator
Description
The ASCD operation status is indicated by two indicators, (CRUISE and SET on
the information display) on
the combination meter.
CRUISE indicator is displayed to indicate that ASCD system is ready for
operation when MAIN switch on
ASCD steering switch is turned ON.
SET indica ...
Vehicle Dynamic Control (VDC) system
The VDC system uses various sensors to
monitor driver inputs and vehicle motion.
Under certain driving conditions, the VDC
system helps to perform the following
functions:
Controls brake pressure to reduce wheel
slip on one slipping drive wheel so power
is transferred to a non-slipping drive
w ...