Nissan Altima manuals

Nissan Altima (L32) 2007-2012 Service Manual: ASCD Indicator

Description

The ASCD operation status is indicated by two indicators, (CRUISE and SET on the information display) on the combination meter.

CRUISE indicator is displayed to indicate that ASCD system is ready for operation when MAIN switch on ASCD steering switch is turned ON.

SET indicator is displayed when the following conditions are met.

• CRUISE indicator is displayed.

• SET/COAST switch on ASCD steering switch is turned ON while vehicle speed is within the range of ASCD setting.

SET indicator is displayed during ASCD control.

Refer to EC-67, "System Description" for the ASCD function.

Component Function Check

1.ASCD INDICATOR FUNCTION

Check ASCD indicator under the following conditions.

Is the inspection result normal? YES >> INSPECTION END

NO >> Go to EC-1472, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK DTC

Check that DTC UXXXX is not displayed.

Is the inspection result normal? YES >> GO TO 2.

NO >> Perform trouble diagnosis for DTC UXXXX.

2.CHECK COMBINATION METER OPERATION

Refer to MWI-38, "CONSULT-III Function (METER/M&A)".

Is the inspection result normal? YES >> GO TO 3.

NO >> Check combination meter circuit. Refer to EC-1179, "Diagnosis Procedure".

3.CHECK INTERMITTENT INCIDENT

Refer to GI-42, "Intermittent Incident".

>> INSPECTION END

ASCD Brake switch

Description When the brake pedal is depressed, ASCD brake switch is turned OFF and stop lamp switch is turned ON. ECM detects the state of the brake pedal by those two types of input (ON/OFF s ...

Cooling fan

Description The ECM controls the cooling fan corresponding to the vehicle speed, engine coolant temperature, refrigerant pressure, and air conditioner ON signal. The control system has 4-step cont ...