Nissan Altima (L32) 2007-2012 Service Manual: Auto operation does not operate
but manual operates normally
(passenger side)
Diagnosis Procedure
1. PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special
Repair Requirement".
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2. CHECK ENCODER
Check encoder.
Refer to PWC-208, "PASSENGER SIDE : Component Function Check".
Is the inspection result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Diagnosis Procedure
1. PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special
Repair Requirement&qu ...
Diagnosis Procedure
1. CHECK DOOR SWITCH
Check door switch.
Refer to PWC-212, "Component Function Check".
Is the inspection result normal?
YES >> Inspection End.
NO >&g ...
Other materials: Tire chains
CAUTION
Only certain SAE class "S" tire chains
can be used on this vehicle. Using the
wrong Class "S" chains on this vehicle
will cause damage to the vehicle. If you
plan to use tire chains/cables, you
should use a tire chain that meets the
minimum clearances for your vehicle.
Use of tire chains ma ...
MOD system operation
The MOD system will turn on automatically
under the following conditions:
When the shift lever is in the R (Reverse)
position.
When the CAMERA button is pressed to
activate the camera view on the display.
When vehicle speed decreases below approximately
6 mph (10 km/h) and the
camera screen ...
Intelligent Around View Monitor
(if so equipped)
CAMERA button
WARNING
Failure to follow the warnings and instructions
for the proper use of the Intelligent
Around View Monitor system
could result in serious injury or death
The Intelligent Around View Monitor
is a convenience feature and is not a
substitute for proper vehicle operation
be ...