Nissan Altima (L33) 2013-2018 Owners Manual: Automatic anti-glare rearview mirror (if so equipped)
The inside mirror is designed so that it automatically dims during night time conditions and according to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position.
The indicator light will illuminate when the automatic anti-glare feature is operating.
NOTE:
Do not hang any objects over the sensors 1 or apply glass cleaner to the sensors.
Doing so will reduce the sensitivity of the sensors, resulting in improper operation.
Type A - Without compass
Type A and Type B
The indicator light 2 will illuminate when the automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press:
● the button for inside mirrors
without
compass.
● the button for inside mirrors
with
compass.
The indicator light will turn off.
Type B - With compass
To turn on the automatic anti-glare feature again,
press:
● the | button for inside mirrors without
compass.
● the button for inside mirrors
with
compass.
The indicator light will turn on.
For information on HomeLink® Universal Transceiver operation, see the “HomeLink® Universal Transceiver” in the “Instruments and controls” section of this manual.
For information on the compass display (if so equipped), see “Compass display” in the “Instruments and controls” section of this manual.
Rearview mirror (if so equipped)
The night position 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 2 when driving in daylight hours. WARNING Use the night position only when necessa ...Outside mirrors
WARNING ● Do not adjust the mirrors while driving. You could lose control of your vehicle and cause an accident. ● Objects viewed in the outside mirror on the passenger side are c ...Other materials:
Voice Adaptation (VA) mode
Voice Adaptation allows up to two out-of-dialect
users to train the system to improve recognition
accuracy. By repeating a number of commands,
the users can create a voice model of their own
voice that is stored in the system. The system is
capable of storing a different voice adaptation
model ...
On-vehicle repair
EVAP CANISTER
Exploded View
Removal and Installation
REMOVAL
1. Lift up the vehicle.
2. Remove EVAP canister fixing bolt.
3. Remove EVAP canister.
NOTE:
The EVAP canister vent control valve and EVAP canister system pressure sensor
can be removed without
removing the EVAP canister ...
Precaution
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
dr ...