Nissan Altima (L32) 2007-2012 Service Manual: Basic inspection
Diagnosis and repair workflow
Work Flow
DETAILED FLOW
1.LISTEN TO CUSTOMER COMPLAINT
Listen to customer complaint. Get detailed information about the conditions
and environment when the symptom
occurs.
>> GO TO 2
...
Other materials:
B2108 steering lock relay
Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN
communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the
steering to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2108 is displayed with DTC U1000, first perf ...
Additional service when removing battery negative terminal
Description
Initial setting is necessary when battery terminal is removed.
CAUTION:
The following specified operations are not performed under the non-initialized
condition.
• Auto-up operation
• Anti-pinch function
• Retained power operation
Special Repair Requirement
INITIALIZAT ...
Noise
Component Function Check
SYMPTOM: Noise
INSPECTION FLOW
*1 HAC-5, "Operational Check"
*2 EM-16, "Checking Drive Belts"
(QR25DE) or EM-121, "Checking
Drive Belts" (VQ35DE)
*3 HAC-87, "Performance Chart"
*4 HA-45, "Removal and Installation for
E ...
