Nissan Altima 2007-2012 Service Manual: Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
DETAILED FLOW
1.CONFIRM SYMPTOM
Confirm symptom or customer complaint.
>> GO TO 2
2.CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to MWI-38, "Diagnosis Description".
Does self-diagnosis mode operate? YES >> GO TO 3
NO >> Check power supply and ground circuit of combination meter. Refer to MWI-43, "COMBINATION METER : Diagnosis Procedure". Then, GO TO 4
3.CHECK COMBINATION METER (CONSULT-III)
Select “METER/M&A” on CONSULT-III and perform “SELF-DIAGNOSIS” of combination meter. Refer to MWI- 38, "CONSULT-III Function (METER/M&A)".
Self-diagnostic results content
No malfunction detected>>Repair or replace the cause of symptom. Then, GO TO 4
Malfunction detected>>Refer to MWI-95, "DTC Index". Then, GO TO 4
4.CONFIRM OPERATION
Does the combination meter operate normally? YES or NO
YES >> Inspection End.
NO >> GO TO 1
Other materials:
P0171 fuel injection system function
DTC Logic
DTC DETECTION LOGIC
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture
ratio can be brought closely to the
theoretical mixture ratio based on the mixture ratio feedback signal from the
A/F sensors 1. The ECM calculates
the necessary compensation to correct t ...
Ignition coil
Exploded View
1. Ignition coil
2. Spark plug
3. Rocker cover (RH)
4. Rocker cover (LH)
Removal and Installation LH
REMOVAL
1. Remove engine room cover.
2. Disconnect ignition coil connector.
3. Remove the ignition coil.
CAUTION:
Never shock ignition coil.
INSTALLATION
Installatio ...
Service data and specifications(SDS)
Wheel Alignment (Unladen*)
Fuel, radiator coolant and engine
oil full. Spare tire, jack, hand tools and mats in designated positions.
Fuel,
radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in
designated positions.
Ball Joint
Wheelarch Height (Unladen*1) ...