Nissan Altima 2007-2012 Service Manual: Battery saver
CONSULT-III Function
WORK SUPPORT
* : Initial setting
DATA MONITOR
ACTIVE TEST
* : Each lamp switch is in ON position.
IMMU
CONSULT-III Function (BCM - IMMU) DATA MONITOR ACTIVE TEST ...Trunk
CONSULT-III Function (BCM - TRUNK) DATA MONITOR ACTIVE TEST ...Other materials:
CD Changer
Removal and Installation
REMOVAL
1. Remove the Cluster D lower finisher. Refer to IP-12, "Removal and
Installation".
2. Put selector lever in the drive "D" position (CVT models only).
3. Put shift lever in neutral (M/T models only).
4. Using a suitable tool remove t ...
B2193, P1612 chain of ECM-IMMU
Description
BCM performs the ID verification with ECM that allows the engine to start.
Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts
the communication with ECM if
ignition switch is turned ON.
DTC Logic
DTC DETECTION LOGI ...
Diagnosis system (meter)
Diagnosis Description
SELF-DIAGNOSIS MODE
• Odo/trip meter and information display segment operation can be checked in
self-diagnosis mode.
• Meters/gauges can be checked in self-diagnosis mode.
OPERATION PROCEDURE
1. Turn the ignition switch OFF.
2. While pushing the odo/trip meter ...