Nissan Altima 2007-2012 Service Manual: BCM (Body control module)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Terminal Layout
Physical Values
1: Sedan only
2: With LH front window anti-pinch
3: With LH and RH front window anti-pinch
4: With Intelligent Key
5: Without Intelligent Key
Wiring Diagram-Coupe
Wiring Diagram-Sedan
Fail Safe
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart.
DTC Index
NOTE:
Details of time display
• CRNT: Displays when there is a malfunction now or after returning to the normal condition until turning ignition switch OFF → ON again.
• 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases like 1 → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch OFF → ON after returning to the normal condition if the malfunction is detected again.
Combination meter
Reference Value TERMINAL LAYOUT PHYSICAL VALUES Wiring Diagram - Coupe Wiring Diagram - Sedan Fail Safe The combinati ...Other materials:
Charging system
Wiring Diagram - Coupe
Wiring Diagram - Sedan
...
Rear lh side power window alone
does not operate
Diagnosis Procedure
1. CHECK REAR POWER WINDOW SWITCH LH
Check rear power window switch LH.
Refer to PWC-110, "REAR POWER WINDOW SWITCH : Component Function Check".
Is th e inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2. ...
Power window system
System Diagram
POWER WINDOW ANTI-PINCH SYSTEM
System Description
POWER WINDOW MAIN SWITCH
INPUT/OUTPUT SIGNAL CHART
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
INPUT/OUTPUT SIGNAL CHART
POWER WINDOW OPERATION
• Power window system is operable during the retained power operation timer
...