Nissan Altima 2007-2012 Service Manual: Body sealing
Description
The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of sealant and not to allow other unaffected parts to come into contact with the sealant.
Corrosion protection
Description To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is nece ...Body construction
Body Construction ...Other materials:
P0740 torque converter clutch solenoid
valve
Description
• The torque converter clutch solenoid valve is activated by the TCM in
response to signals sent from the vehicle
speed and accelerator pedal position sensors. Lock-up piston operation will then
be controlled.
• Lock-up operation, however, is prohibited when CVT fluid temper ...
Seat belt maintenance
● To clean the seat belt webbing, apply a
mild soap solution or any solution recommended
for cleaning upholstery or carpet.
Then wipe with a cloth and allow the seat
belts to dry in the shade. Do not allow the
seat belts to retract until they are completely
dry.
● If dirt builds ...
If your vehicle overheats
If your vehicle is overheating (indicated by an
extremely high temperature gauge reading), or if
you feel a lack of engine power, detect abnormal
noise, etc. take the following steps.
WARNING
● Do not continue to drive if your vehicle
overheats. Doing so could cause engine
damage or a v ...