Nissan Altima 2007-2012 Service Manual: C1729 vehicle speed signal

Description

The vehicle speed signal is not being detected by the BCM.

DTC Logic

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.CHECK SELF-DIAGNOSTIC RESULTS

1. On SELECT DIAG MODE, select the SELF-DIAG RESULT screen.

2. Check display contents on SELF DIAG RESULT screen.

Is the CAN COMM CIRCUIT displayed in the self-diagnosis display? YES >> Refer to WT-19, "Diagnosis Procedure".

NO >> Inspection End.

Diagnosis Procedure

MALFUNCTION CODE NO. 52 (DTC C1729)

1.CHECK SELF-DIAGNOSTIC RESULTS

1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.

2. Check display contents on “SELF DIAG RESULT” screen.

Is the “CAN COMM CIRCUIT” displayed in the self-diagnosis display? YES >> Perform trouble diagnosis for CAN communication system. Refer to LAN-25, "CAN System Specification Chart".

NO >> Check combination meter. Refer to MWI-38, "CONSULT-III Function (METER/M&A)".

Special Repair Requirement

Perform preliminary check. Refer to WT-5, "Preliminary Check".

    C1716 - C1719 Transmitter pressure malfunction
    Description Air pressure data from one or more transmitters is out of range. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.ID REGISTRATION AND VEHICLE DRIVING 1. Carry out ID reg ...

    C1734 control unit
    Description An internal malfunction has been detected in the TPMS function of the BCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSTIC RESULTS 1. On SELECT DI ...

    Other materials:

    P1701 transmission control module (power supply)
    Description When the power supply to the TCM is cut OFF, for example because the battery is removed, and the self-diagnosis memory function stops, malfunction is detected. NOTE: Since “P1701 TCM-POWER SUPPLY” will be indicated when replacing TCM, perform diagnosis after erasing “SE ...

    Manual control
    While using the Voice Recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. The manual control mode does not allow dialing a phone number by digits. The user may select an entry from the Phonebook or Recent Calls list ...

    B2607 steering lock relay
    Description BCM requests to IPDM E/R to supply power to electronic steering column lock. IPDM E/R sends status of electronic steering column lock back to BCM. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2607 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U100 ...