Nissan Altima Owners Manual: Canceling a remote start

To cancel a remote start, perform one of the following:
● Aim the Intelligent Key at the vehicle and press and hold lights until the parking
lights turn off.

● Turn on the hazard warning flashers.

● Cycle the ignition switch ON and then OFF.

    Extending engine run time
    The remote start feature can be extended one time by performing the steps listed in “Remote starting the vehicle” in this section. Run time will be calculated as follows: ● The first 10 ...

    Conditions the remote start will not work
    The remote start will not operate if any of the following conditions are present: ● The ignition switch is placed in the ON position. ● The hood is not securely closed. ● The haz ...

    Other materials:

    Tire chains
    CAUTION Only certain SAE class “S” tire chains can be used on this vehicle. Using the wrong Class “S” chains on this vehicle will cause damage to the vehicle. If you plan to use tire chains/cables, you should use a tire chain that meets the minimum clearances for your vehicle. Use ...

    B2109 steering lock relay
    Description The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication. IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2109 is displayed with DTC U1000, first perf ...

    Rear window and outside mirror (if so equipped) defroster switch
    Type A To defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automat ...