Nissan Altima manuals
Nissan Altima (L33) 2013-2018 Owners ManualTechnical and consumer information ≻ Capacities and recommended fuel/lubricants

Nissan Altima (L33) 2013-2018 Owners Manual: Capacities and recommended fuel/lubricants

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.

*1: For further details, see “Engine oil and oil filter recommendations” in


*1: For further details, see “Engine oil and oil filter recommendations” in this section.

*2: Use only Genuine NISSAN CVT Fluid NS-3. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-3 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty.

*3: Use of a power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly.

*4: Available in mainland USA through a NISSAN dealer.

*5: For further details, see “Air conditioner system refrigerant and oil recommendations” in this section.

*6: For further details, see “Engine oil” in the “Maintenance and do-it-yourself” section of this manual.

*7: NISSAN recommends Genuine NISSAN Ester Oil available at a NISSAN dealer. As an alternative to this recommended oil, SAE 5W-30 or SAE 10W-30 conventional petroleum oils may be used and meet all specifications and requirements necessary to maintain the New Vehicle Limited Warranty.

*8: See your NISSAN dealer for service.

*9: As an alternative to this recommended oil, SAE 5W-30 conventional petroleum oils may be used and meet all specifications and requirements necessary to maintain the New Vehicle Limited Warranty.

Fuel recommendation
Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). CAUTION ● Using a fuel other than that specified could adversel ...

Other materials:

Parking, license plate and tail lamps are not turned on
Description The parking, license plate and tail lamps do not turn ON in with any lighting switch setting. Diagnosis Procedure 1.COMBINATION SWITCH INSPECTION Check the combination switch. Refer to BCS-10, "System Description". Is the combination switch normal? YES >> GO T ...

Road wheel tire assembly
Adjustment WHEEL BALANCE 1. Remove inner and outer balance weights from the wheel. CAUTION: • Be careful not to scratch the wheel during removal procedures. 2. Using releasing agent, remove double-faced adhesive tape from the wheel. CAUTION: • Be careful not to scratch the wheel durin ...

Headlamp
CONSULT-III Function WORK SUPPORT 1 : Initial setting 2: With auto light system DATA MONITOR 1: With auto light system. 2: The item is indicated, not monitored. ACTIVE TEST ...