Nissan Altima (L33) 2013-2018 Owners Manual: Changing engine coolant
A NISSAN dealer can change the engine coolant.
The service procedure can be found in the NISSAN Service Manual.
Improper servicing can result in reduced heater performance and engine overheating.
WARNING
● To avoid the danger of being scalded, never change the coolant when the engine is hot.
● Never remove the radiator cap when the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator.
● Avoid direct skin contact with used coolant. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
● Keep coolant out of the reach of children and pets.
Engine coolant must be disposed of properly.
Check your local regulations.
Checking engine coolant level
Check the coolant level in the reservoir when
the engine is cold. If the coolant level is below
the MIN level B , add coolant to the MAX level
A . If the reservoir is empty, check the coolant
le ...
Engine oil
...
Other materials:
P0500 VSS
Description
The vehicle speed signal is sent to the combination meter from the “ABS
actuator and electric unit (control
unit)” by CAN communication line. The combination meter then sends a signal to
the ECM by CAN communication
line.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC P0 ...
Disassembly and assembly
TORQUE CONVERTER AND CONVERTER
HOUSING OIL SEAL
Exploded View
1. CVT assembly
2. Converter housing oil seal
3. Torque converter
Apply CVT Fluid. Refer to MA-12,
"Fluids and Lubricants".
Disassembly
1. Remove torque converter.
2. Remove the converter housing oil seal using s ...
B2601 shift position
Description
BCM confirms the shift position with the following 2 signals.
• CVT selector lever
• P position signal from IPDM E/R (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-36 ...
