Nissan Altima (L32) 2007-2012 Service Manual: Combination meter
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
Wiring Diagram - Coupe
Wiring Diagram - Sedan
Fail Safe
The combination meter performs a fail-safe operation for the functions listed below when communication is lost.
DTC Index
NOTE: “TIME” indicates the following.
• 0: Indicates that a malfunction is detected at present.
• 1-63: Indicates that a malfunction was detected in the past. (Displays number of ignition switch OFF → ON cycles after malfunction is detected. Self-diagnosis result is erased when “63” is exceeded.)
ECU diagnosis
...BCM (Body control module)
Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH f ...Other materials:
Trouble diagnosis
Condition of Error Detection
“U1000” or “U1001” is indicated on SELF-DIAG RESULTS on CONSULT-III if CAN
communication signal is
not transmitted or received between units for 2 seconds or more.
CAN COMMUNICATION SYSTEM ERROR
• CAN communication line open (CAN-H, CAN-L, or both)
• ...
P0133, P0153 A/F sensor 1
Description
The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor.
The sensor element of the A/F sensor 1 is composed an electrode
layer, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement = 1, but also in the
lean and ...
Shift mechanism
System Diagram
NOTE:
The gear ratio is set for every position separately.
System Description
In order to select the gear ratio which can obtain the driving force in
accordance with driver's intention and the
vehicle condition, TCM monitors the driving conditions, such as the vehicle
spe ...