Nissan Altima (L32) 2007-2012 Service Manual: Common ITEM
CONSULT-III Function
ECU IDENTIFICATION
Displays the BCM part No.
SELF-DIAG RESULT
Refer to BCS-91, "DTC Index".
Retaind PWR
CONSULT-III Function (BCM - RETAINED PWR) Data monitor ...Other materials:
P0500 VSS
Description
The vehicle speed signal is sent to the combination meter from the “ABS
actuator and electric unit (control
unit)” via the CAN communication line. The combination meter then sends a signal
to the ECM via the CAN
communication line.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• I ...
P0442 Evap control system
DTC Logic
DTC DETECTION LOGIC
This diagnosis detects leakage in the EVAP purge line using engine intake
manifold vacuum.
If pressure does not increase, the ECM will check for leakage in the line
between the fuel tank and EVAP canister
purge volume control solenoid valve, under the followin ...
Can communication circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CONNECTOR INSPECTION
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect all the unit connectors on CAN communication system.
4. Check terminals and connectors for damage, bend and loose con ...