Nissan Altima 2007-2012 Service Manual: Common ITEM
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE: It can perform the diagnosis modes except the following for all sub system selection items.
CONSULT-III Function
ECU IDENTIFICATION
Displays the BCM part No.
SELF-DIAG RESULT
Refer to PCS-127, "DTC Index".
Intelligent key
CONSULT-III Function (BCM - INTELLIGENT KEY) DATA MONITOR ...Other materials:
ASCD Brake switch
Description
When the brake pedal is depressed, ASCD brake switch is turned OFF and stop
lamp switch is turned ON.
ECM detects the state of the brake pedal by those two types of input (ON/OFF
signal).
Refer to EC-1090, "System Diagram" for the ASCD function.
Component Function C ...
B2609 steering status
Description
There are 2 switches in the electronic steering column lock (steering
lock/unlock switch 1 and 2). BCM compares
those two switches conditions to judge the present steering status.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2609 is displayed with DTC U1000, first perform the ...
Steering gear and linkage
Exploded View
1. Cotter pin
2. Steering gear assembly
Removal and Installation
REMOVAL
1. Remove the front tires.
2. Remove undercover using power tool.
3. Remove lower side bolt of lower joint.
4. Remove cotter pin (1), and then loosen the nut.
5. Remove steering outer socket ...