Nissan Altima 2007-2012 Service Manual: Component diagnosis
- B1049 – B1052, B1054 – B1057 driver airbag module
- B1065 – B1068, B1070 – B1073 passenger airbag module
- B1134 – B1137 side airbag module LH
- B1129 – B1132 side airbag module RH
- B1150 – B1153 side curtain air bag module LH
- B1145 – B1148 side curtain air bag module RH
- B1086 – B1089 seat belt pre-tensioner LH
- B1081 – B1084 seat belt pre-tensioner RH
- B1033 – B1035 crash zone sensor
- B1118 – B1120 satellite sensor LH
- B1113 – B1115 satellite sensor RH
- B1xxx air bag diagnosis sensor unit
- B1023 passenger air bag off indicator
- B1017 – b1022 occupant classification system
- B1209 – b1210 collision detection
On board diagnostic (OBD) system
Trouble Diagnosis Introduction
CAUTION:
• Do not use electrical test equipment on any circuit related to the SRS unless
instructed to do so in
this Service Manual. SRS wiring harnesses can be i ...
B1049 – B1052, B1054 – B1057 driver airbag
module
Description
DTC B1049 – B1052, B1054 – B1057 DRIVER AIRBAG MODULE
The driver air bag module is dual stage and wired to the air bag diagnosis
sensor unit through the spiral cable.
The air ba ...
Other materials:
ECU Diagnosis
ECM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Remarks:
● Specification data are reference
values.
● Specification data are output/input
values which are detected or supplied by the ECM at the connector.
* Specification data may not be directly related to the ...
Diagnosis system (BCM)
COMMON ITEM
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub sy ...
None of the power windows can be
operated using any switch
Diagnosis Procedure
1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to BCS-42, "Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2. CHECK MAIN POWER ...
