Nissan Altima 2007-2012 Service Manual: Component diagnosis
- Lan system circuit
- Mode door motor
- Air mix door motor
- Intake door motor
- Blower motor
- Magnet clutch
- Ambient sensor
- In-vehicle sensor
- Sunload sensor
- Intake sensor
- Power supply and ground circuit for front air control
Self-diagnosis function
Diagnosis Description
SELF-DIAGNOSIS SYSTEM
The self-diagnosis system is built into the front air control to quickly
locate the cause of malfunctions.
SELF-DIAGNOSIS FUNCTION
The self-diagnosis ...
Lan system circuit
Description
SYMPTOM: Mode door motor, intake door motor and/or air mix door motor does
not operate normally.
Diagnosis Procedure
DIAGNOSIS PROCEDURE FOR LAN CIRCUIT
1.CHECK POWER SUPPLY FOR D ...
Other materials:
BSW driving situations
Another vehicle approaching from
behind
The Blind spot indicator light illuminates if a vehicle
enters the detection zone from behind in an
adjacent lane.
However, if the overtaking vehicle is traveling
much faster than your vehicle, the indicator light
may not illuminate before the detec ...
B210C starter control relay
Description
Starter control relay, integrated in IPDM E/R, permits the starter relay
operation when in N or P position and
the steering is locked or unlocked. It is installed in parallel with the starter
relay.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210C is displayed with DTC U10 ...
P1574 ASCD Vehicle speed sensor
Description
The ECM receives two vehicle speed signals via CAN communication line. One is
sent from combination
meter, and the other is from TCM (Transmission control module). The ECM uses
these signals for ASCD control.
Refer to EC-603, "System Description" for ASCD functions.
D ...
