Nissan Altima 2007-2012 Service Manual: Component diagnosis
- Power supply and ground circuit
- Power window motor
- Encoder
- Door switch
- Door key cylinder switch
- Power window serial link
- Power window lock switch
Diagnosis system (BCM)
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each sy ...
Other materials:
P0137 HO2S2
Description
The heated oxygen sensor 2, after three way catalyst (manifold),
monitors the oxygen level in the exhaust gas on each bank.
Even if switching characteristics of the air fuel ratio (A/F) sensor 1
are shifted, the air-fuel ratio is controlled to stoichiometric, by the signal
from t ...
Bose speaker AMP
Diagnosis Procedure
1.CHECK FUSE
Check that the following fuses of the BOSE speaker amp. are not blown.
Are the fuses OK?
YES >> GO TO 2
NO >> Be sure to eliminate cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
...
P2004 tumble control valve
Description
Tumble control valve (3) is installed in the intake manifold adapter
(1).
Tumble control valve actuator (2) is connected to the front end of the
valve shaft.
Tumble control valve actuator consists of motor and position sensor,
etc.
The motor opens or closes the valve by the ...