Nissan Altima 2007-2012 Service Manual: Component diagnosis
- U1000 can comm circuit
- U1010 control unit (CAN)
- B2553 ignition relay
- B260A ignition relay
- B2611 ACC relay
- B2614 ACC relay circuit
- B2615 blower relay circuit
- B2616 ignition relay circuit
- B2618 BCM
- B261A push-button ignition switch
- Power supply and ground circuit
- Push-button ignition switch position indicator
Intelligent key
CONSULT-III Function (BCM - INTELLIGENT KEY)
DATA MONITOR
...
U1000 can comm circuit
Description
Refer to LAN-7, "System Description".
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.PERFORM SELF DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 second or mo ...
Other materials:
Optical sensor
Description
The optical sensor converts the outside brightness (lux) to voltage and
transmits the optical sensor signal to
the BCM.
Component Function Check
1.CHECK OPTICAL SENSOR SIGNAL BY CONSULT-III
1. Turn the ignition switch ON.
2. Select "OPTICAL SENSOR" of BCM (HEAD LAMP ...
Intake manifold
Removal and Installation
1. Intake manifold
2. Gasket
A. Follow installation procedure
REMOVAL
WARNING:
To avoid the danger of being scalded, never drain the coolant when the engine is
hot.
1. Remove the engine cover with power tool.
2. Release the fuel pressure. Refer to EC-1579, &quo ...
The low washer fluid warning continues
displaying, or does not display
Description
• The warning is still displayed even after washer fluid is added.
• The warning is not displayed even though the washer tank is empty.
Diagnosis Procedure
1.CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT
Check the washer level switch signal circuit. Refer to MWI-51, "Diagnosi ...