Nissan Altima 2007-2012 Service Manual: Cowl top

Removal and Installation

1. Cowl top seal

2. Cowl top side trim covers

3. Cowl top foam blocks

4. Cowl top

A. Clips

REMOVAL

1. Remove both the RH and LH wiper arms. Refer to WW-116, "FRONT WIPER ARMS : Removal and Installation".

2. Remove the cowl top side trim covers.

3. Remove the cowl top foam blocks.

4. Remove the cowl top clips and remove the cowl top.

INSTALLATION

Installation is in the reverse order of removal.

    Front grille
    Removal and Installation 1. Front bumper fascia 2. Front grille 3. License plate bracket 4. Fog lamp finisher (if equipped) 5. Fog lamp (if equipped) A. Clip C101 Removal 1. Remove the fron ...

    Fender protector
    Removal and Installation 1. Fender protector 2. Fender protector side cover A. J-clips B. Clips C. Center mudguard screw a. Sheet metal nut REMOVAL 1. Remove the engine under cover. Refer ...

    Other materials:

    Warning lamp
    Description • Warning lamp is built in combination meter. • Intelligent Key system malfunction is reported to the driver by the warning lamp illumination. Component Function Check 1.CHECK FUNCTION 1. Perform “INDICATOR” in the “Active Test” mode with CONSULT-III. 2. Check wa ...

    Door key cylinder switch
    Description Power window main switch detects condition of the door key cylinder and transmits to BCM as the LOCK or UNLOCK signals. Component Function Check 1. CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL Check (“KEY CYL LK-SW”, “KEY CYL UN-SW”) in “DATA MONITOR” mode for “POWER ...

    ASCD brake switch
    Description When the brake pedal is depressed, ASCD brake switch is turned OFF and stop lamp switch is turned ON. ECM detects the state of the brake pedal by this input of two kinds (ON/OFF signal). Refer to EC-67, "System Description" for the ASCD function. Component Function ...