Nissan Altima 2007-2012 Service Manual: Cowl top

Removal and Installation

1. Cowl top seal

2. Cowl top side trim covers

3. Cowl top foam blocks

4. Cowl top

A Clips

REMOVAL

1. Remove both the RH and LH wiper arms. Refer to WW-116, "FRONT WIPER ARMS : Removal and Installation".

2. Remove the cowl top side trim covers.

3. Remove the cowl top foam blocks.

4. Remove the cowl top clips and remove the cowl top.

INSTALLATION

Installation is in the reverse order of removal.

    Front grille
    Removal and Installation 1. Front grille 2. Bumper fascia FRONT GRILLE Removal 1. Remove the front grille clips. 2. Release the grille tabs from the front bumper fascia, then remove the ...

    Fender protector
    Removal and Installation 1. Fender protector 2. Fender protector side cover A. J-clips B. Clips C. Center mudguard screw a. Sheet metal nut REMOVAL 1. Remove the engine under cover. Refer ...

    Other materials:

    ECU diagnosis
    POWER STEERING CONTROL UNIT Reference Value TERMINAL LAYOUT PHYSICAL VALUES CAUTION: When using circuit tester or oscilloscope to measure voltage for inspection, be sure not to extend forcibly any connector terminals. Wiring Diagram — ELECTRONICALLY CONTROLLED POWER STEERING SYSTEM ...

    Can communication
    System Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and ...

    P0011 IVT Control
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0011 is displayed with DTC P0075, first perform the trouble diagnosis for EC-867, "DTC Logic". DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF ...