Nissan Altima (L32) 2007-2012 Service Manual ≻ Accelerator control system Clutch ≻ Removal and installation ≻ CSC (Concentric slave cylinder)

Nissan Altima (L32) 2007-2012 Service Manual: CSC (Concentric slave cylinder)

Exploded View

1. Transaxle assembly

2. CSC (Concentric Slave Cylinder)

Removal and Installation

CAUTION: • If transaxle assembly is removed from the vehicle, always replace CSC. Return CSC insert to original position to remove transaxle assembly. Dust on clutch disc sliding parts may damage CSC seal and may cause clutch fluid leakage.

• Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.

REMOVAL

1. Remove the transaxle assembly. Refer to TM-26, "Removal and Installation".

2. Remove CSC bolts and CSC from clutch housing.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION: • Do not reuse CSC.

• Do not insert and operate CSC because piston and stopper of CSC components may fall off. After installation, bleed clutch hydraulic system. Refer to CL-7, "Air Bleeding Procedure".

Removal and installation

...

Clutch disc and clutch cover

Exploded View 1. Flywheel 2. Clutch disc 3. Clutch cover 1. Flywheel 2. Clutch disc *1, *2 3. Clutch cover A. First step B. Final Step Apply lithium-based grease including molybdenum ...

Other materials:

Front wiper drive assembly
Removal and Installation REMOVAL 1. Operate front wiper motor, and stop at the auto stop position. 2. Remove wiper arms. Refer to WW-116, "FRONT WIPER ARMS : Removal and Installation". 3. Remove the cowl top cover. For Sedan Refer to EXT-39, "Removal and Installation". ...

U1213 DVD-ROM data
Description Refer to AV-240, "System Description". DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK DVD-ROM Check DVD-ROM for dirt, scratches and warpage. Is the DVD-ROM clean and undamaged? YES >> Replace AV control unit. Refer to AV-437, "Removal and Ins ...

Battery
● Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery ter ...