Nissan Altima (L32) 2007-2012 Service Manual: Diagnosis system (BCM)
COMMON ITEM
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system
selection items.
CONSULT-III Function
ECU IDENTIFICATION
Displays the BCM part No.
SELF-DIAG RESULT
Refer to BCS-91, "DTC Index".
INTELLIGENT KEY
CONSULT-III Function
(BCM - INTELLIGENT KEY)
WORK SUPPORT
SELF-DIAG RESULT
Refer to BCS-91, "DTC Index".
DATA MONITOR
ACTIVE TEST
THEFT ALM
CONSULT-III Function (BCM -
THEFT ALM)
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
IMMU
CONSULT-III Function (BCM - IMMU)
DATA MONITOR
ACTIVE TEST
System Diagram
System Description
INPUT/OUTPUT SIGNAL CHART
OPERATION FLOW
SETTING THE VEHICLE SECURITY SYSTEM
Initial Condition
• Ignition switch is in OFF position.
Disarmed Phase
†...
Other materials: Bluetooth connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If
the vehicle starts moving during the procedure,
the procedure will be canceled.
To connect a phone to the Bluetooth
Hands-Free Phone System:
Bluetooth Connecting Procedure
1. Touch the "Settings" key on the Launch
B ...
Power outlet
Instrument Panel
The power outlet is for powering electrical
accessories such as cellular telephones.
It is rated at 12 volt, 120W (10A) maximum.
The power outlet is powered only when the
ignition switch is in the AUTO ACC or ON
position.
CAUTION
The outlet and plug may be hot during
or immedi ...
Fuel recommendation
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock
Index) number (Research octane number
91).
CAUTION
Only vehicles with the E-85 filler door
label can operate on E-85. Fuel system
or other damage can occur if
E-85 is used in vehicles that are not
designed to ru ...
Vehicle security system
Component diagnosis